SECTION 3.3
11
3.3 Adding an Access Code
While in Programming Mode,
select “1AD” to add an Access
Code. If you are not in
Programming Mode, please
see Section 3.2 to enter
Programming Mode.
After pressing “1AD” press “Pd”
to add an Access Code.
Enter your new 6 - 8 digit Access Code and press
when you are finished. You will then re-enter the code to
confirm your new Access Code.
Remember, just touch the digit you need within the circle
around each 3 numbers. There is no need to touch the
exact location of the number. For example, based on the
example image to the left, if you need “1”, you can touch
the upper left button or the lower right button. For “6”, you
would touch the upper right button.
