10
SECTION 3.2
3.2 Entering Programming Mode
Add Access Code
Mode
Number
Delete Access Code
View Access Code
Program Button
To enter Programming Mode, remove the
battery compartment cover on the interior
side of the
lock
to expose the Reset and
Program buttons.
Simply press the Program button to enter
programming mode.
Note: Program button will be disabled once
synced to a smart phone. Configure all settings
via synced smart phone. Access Codes
previously added by Programming mode will
be cleared.
To end Programming Mode, press the Program button anytime.
Programming Mode will automatically exit if the keypad is inactive for more than thirty (30)
seconds.
After entering Programming Mode, you should see the
screen as displayed to the right on your Lockly keypad.
Follow the following steps to add, delete, or check
your Access Codes.
