NOTE:
CYLINDER IS BELOW HUB
Inswinging door
Outswinging door
R/Hand
L/Hand
Outside
Outside
Outside
Outside
LOCK HANDING DIAGRAM
VIEW FROM SCREW
SIDE OF CASE
VIEW FROM SCREW
SIDE OF CASE
VIEW FROM PLAIN
SIDE OF CASE
VIEW FROM PLAIN
SIDE OF CASE
VIEW FROM SCREW
SIDE OF CASE
VIEW FROM PLAIN
SIDE OF CASE
VIEW FROM SCREW
SIDE OF CASE
VIEW FROM PLAIN
SIDE OF CASE
VIEW FROM PLAIN
SIDE OF CASE
swing
swing
VIEW FROM PLAIN
SIDE OF CASE
1. LOCK STATUS /
QUICK REFERENCE
2. HANDING LOCKING FUNCTION
-Ensure swinging locking bar is unlocked: swung
away from hinge side. (Factory default is unlocked)
-Use index finger to rotate if required.
IMPORTANT!
Gainsborough mortice locks are
fully field reversible. Opening the
case is not necessary and voids
the warranty!
To verify lock has been handed correctly, rotate
swinging
locking bar
towards the hinge side of the lock.
Yellow
hub function control
should not be
visible from selected LOCKED hub side/s.
2B
Slot
- Determine hand of door from lock handing diagram.
- Determine the outside of the lock case.
- Lock function can be altered to suit:
* Hubs locked both sides.
* Hub locked on one side only.
HUB
FACE PLATE
HUB FUNCTION CONTROL (YELLOW)
- Slides to set each side for
locking or unlocking function.
-Both sides supplied locked
LATCH & AUXILIARY BOLTS
- Remove face plate and
swivel bolts to re-hand.
SWINGING LOCKING BAR
- This is operated by the cylinder
cam to lock/unlock the hubs.
- Supplied unlocked.
BOTH
SIDES
LOCKED.
- Use a sharp point such as a steel nail to slide
hub function control
(yellow)
- If
hub function contol
doesn't slide easily or is not visible, refer to step 2B.
2A
RIGHT
HAND
LOCKED
ONLY.
LEFT
HAND
LOCKED
ONLY.
2C
Slot
Slot
2D
2400 / 2500 SERIES MORTICE LOCK
INSTALLATION / SETTING
VIEW FROM SCREW
SIDE OF CASE
VIEW FROM SCREW
SIDE OF CASE
