background image

AIR RIVETER

INSTRUCTION MANUAL

Professional model of air riveter to install blind rivets.

Thank you very much for purchasing “LOBSTER” air riveter. 
To ensure correct operation, please read this instruction manual carefully, and keep it in a safe place 
for later reference.
In case you have some trouble and failure, please refer “Troubleshooting” in the Instruction Manual.
Lobtex Co.,Ltd. has the copyright of this manual. It is prohibited to publish, copy or translate to other 
language without prior consent.

CONTENTS

IMPORTANT SAFETY
INSTRUCTIONS.................................1

NOMENCLATURE .............................4

TECHNICAL DATA ...........................5

PREPARATION BEFORE USE .......6

OPERATING THE AIR RIVETER

....8

MAINTENANCE .................................9

EXPLODED VIEW............................17

TROUBLESHOOTING .....................16

STORAGE .......................................19

ORDERING PARTS .........................19

PARTS LIST .....................................18

International Marketing & Sales Division

12-8 Shijo-cho, Higashi-Osaka City

Osaka 579-8053, Japan

Telephone: +81(72)981-7466
Telefacs: +81(72)981-9420

URL http://www.lobtex.co.jp/

MANUFACTURER

PRINTED IN JAPAN

ⱥㄒ㸭(1*/,6+

BUILT-IN ON-DEMAND

VACUUM SYSTEM

R1A1

(A)

Содержание R1A1























Отзывы: