LNS QUICK LOAD SERVO S3 T BARFEED, Руководство по обслуживанию

Страница: 70 / 152

SETTINGS
SERVICE MANUAL – QL Servo S3-T
Variable/constant material length
(may not be visible)
By activating this parameter, it is possible to save time when
loading the new bar.
In standard operation, the loading pusher moves at high speed
until it reaches the rear limiter, the position which matches the
maximum bar length which may be loaded (Lmax). It measures
and then inserts the bar in the spindle at moderate speed.
When the bars to be loaded are identical in length, it is possible
to activate this parameter. The rear limiter must then be moved
to ensure that longer bars cannot be loaded.
When the first bar is loaded, the bar feeder measures the length
of the bar, which explains why the loading pusher moves slowly.
From the second bar, the loading pusher will move to the
position of the rear limiter at high speed, thereby reducing the
loading time.
Quick loading with non-rotating reduction
(may not be visible)
When a fixed (non-rotating) reduction is installed in the spindle at
the rear of the lathe, it is possible to feed the new bar while a part
is being machined.
This parameter must only be used when a physical limiter is in
place on the bar magazine to prevent longer bars from being
loaded, which could damage the lathe. Please contact your LNS
agent for more information on this application.