LNS QUICK LOAD SERVO S3 T BARFEED, Руководство по обслуживанию

Страница: 35 / 152

MECHANICAL EQUIPMENT
SERVICE MANUAL – QL Servo S3-T
LOADING TABLE
DESCRIPTION
When they are on the magazine, the bars (A) press against the loading stops (B) . The stops are arranged on an axis (C) which
is coupled to the loading table (D) . The stops are adjusted automatically by the electric motor M2, at the same time as the
loading table is configured.
The bar feeder loading table performs two functions
1. Selection of the material
When the table (A) is in the lowered position, the pusher (B) is opposite the spindle (C) .
The pneumatic cylinders are active, the table is raised and selects the bar (D) which is pressing against the stops
(E) on the bar magazine.
2. Guiding of the material:
When in the raised position, the loading table is aligned with the spindle.
The bar can therefore be inserted into the spindle.
To ensure that the bar is always perfectly centered in the spindle, whatever its diameter, a motor (M2) adjusts the height of
the loading table automatically, as soon as the bar diameter is entered into the parameters.