LNS ECO LOAD, Инструкция по эксплуатации

Страница: 46 / 67

42
ECO LOAD
7.7 Alarms list
Alarms Alarm text Description
e01
SR1 or SR2
broken
SR1 and SR2 be ON simultaneously. It means one
of those sersors is broken.
e02
SR1 or SR2 not
active S2/SR1 is not ON after SR1/ SR2 be OFF after
internal timer is ON. ( which means the channel
does not go to 0° / 15° degree position from
15° / 0° )
e03
First feed Pusher cannot reach FIRST FEED position during
first feed action.
e04 -
F7 is smaller than F6 (F6 must always smaller than
F7)
e05 -
1) Pusher cannot TOP CUT position during TOP
CUT process.
2) TOP CUT device ( as “measuring cell” in QLS )
was not reset before TOP CUT process is
proceeded.
e06 -
The bar feeder does receive chuck open signal
before:
- A new bar stock arrives TOP CUT position
- FIRST FEED action was proceeded.
e07 -
Magazine is empty
e08 -
Pusher current position was checked larger than F7
setup when chuck is open.
e09 -
Check if the chuck is open when the chuck opened
during the BAR END signal is currently arising. The
alarm will arise if the chuck open signal is less than 1
second.
e10 -
Remnant cannot be ejected. ( the pusher cannot
arrive F7 position during the ejection process )
NOTE> uring bar change process. The bar feeder
will proceed checkpoint e09, e10 then e05.