LNS Alpha ST 320, Инструкция по эксплуатации

Страница: 54 / 117

CHAPTER 5: PNEUMATICS
ALPHA ST 320
5-2
1. PNEUMATIC EQUIPMENT
Please read the safety precautions described at the beginning of this manual before
handling the following devices.
1.1 Description
The following automatic movements of the Alpha ST 320 bar feeder system are done via pneumatic
elements, namely:
ƒ
The locking of the feeding pusher
ƒ
The raising and lowering of the guiding channels
ƒ
The opening and closing of front rest and vise
ƒ
The loading of the bar stock
ƒ
The air blast unit
To guarantee optimal operation of the bar feed system, a minimum pressure of 5 bar (75psi), and a
maximum pressure of 6 bar (90psi) is mandatory.
It is required to supply dry and clean air to the bar feeder. We provide you an extension hose with
standard fitting to connect the bar feeder to your equipment. (Fig 5.1 #1) Adjust the output pressure using
the knob (Fig 5.1 #2), you can read the value on the gauge. (Fig 5.1 #3) Factory setting: 6 bar.
Fig 5.1
1
2
5
3
4
1.2 Weekly maintenance
Check and complete the oil level in the lubricant tank (Fig 5.1 #4). To add oil, disconnect the air; loosen
the oil tank to take it out. Oil viscosity ISO 100.
Check and drain the water in the filter unit (Fig 5.1 #5). To drain the water, loosen the screw under the
tank.