8-3 Short-Spin
1) Please set speed using the button
(RPM/RCF) and
( , ).
2) The unit stops after reaching at preset RPM.
8-4 Opening the centrifuge in the event of power failure
In case of a power failure during operation, the lid cannot be opened.
If power is supplied again the alarm will beep and the rotor will stop.
The lid cannot be opened until the rotor comes to a complete stop.
Please make sure that the rotor has come to a complete stop.
Lift up Mini Centrifuge, insert a pen into the opening in the base and move the
lever in the direction of the arrow.
When lifting up the centrifuge, particularly after a device failure, please
note that the motor on the underside of the centrifuge can become hot. Please
hold the device at the edges only.
9. Maintenance
Cleaning
The rotor and outside of the centrifuge should be cleaned regularly with a damp
cloth.
Disconnect the centrifuge from the main supply before the cleaning.
Only neutral agents or a mild liquid soap may be used.
Do not use chemical cleaning agents or strong solvents.
Mechanical or chemical damage
Do not operate the centrifuge when there is mechanical or chemical damage.
Change faulty parts immediately.
15
DOMINIQUE DUTSCHER SAS
