INSTALLATION
15
Figure 1-9, Connecting the Power to Enclosure.
3. ThunderBox 600 RAID storage automatically turns off when the
computer to which it is attached sleeps or is disconnected.
Note:
You can press and hold the “Reset” button for 3 seconds to
force the RAID storage AC power on or off.
When you are finished installing the ThunderBox 600 RAID
storage, you can set up the RAID volume using McRAID stor-
age manager or LCD to set up RAID volumes.
1.5.2 Mac Users
1.5.2.1 Install the MRAID Software
This section describes detailed instructions for installing the
Mac driver & utility for the ThunderBox 600 on your Apple
Thunderbolt capable machine. You must have administrative
level permissions to install Mac OS X driver & utility. This can be
done in just a few steps!
1. Download the install_mraid installer from the website at
“http://www.areca.com.tw/support/s_ thunderbolt/thunder-
bolt.htm”, the file name begins with “install_mraid” followed
by the version control or insert the ThunderBox 600 software
CD in the CD-ROM drive.
