INSTALLATION
11
2. Install t
he drive into the drive tray and secure the drive to the
drive tray by four of the mounting screws.
Figure 1-5, Sliding Drive Tray into Enclosure
3. After all drives are in the drive tray, slide all of them back into
the ThunderBox 600 RAID storage and make sure you latch the
drive trays.
Step 2. Connecting RAID Storage to Thunderbolt Ports
Thunderbolt connectors are provided on the back of the
ThunderBox 600 RAID storage for connecting the array to
Thunderbolt host and next Thunderbolt devices. There are two
Thunderbolt connectors on the rear of ThunderBox 600 RAID
storage. You can plug-in two host ports.
1.
Direct connection to a Thunderbolt technology capable
computer.
2.
Daisy chaining Thunderbolt capable devices and displays.
Figure 1-4-1. Installing 2.5-inch
SAS/SATA Drive
Figure 1-4-2. Installing 3.5-inch
SAS/SATA Drive
