LMI Gocator 2000 Family, Руководство пользователя

Страница: 106 / 194

Management and Recovery • 106 Gocator 2000 Family
Working with Backups
The Maintenance Panel can be used to create sensor backups, restore from a backup, or restore to
factory defaults.
Backup files contain all of the information stored onboard a sensor, including configuration, calibration,
template, and replay files.
It is recommended that Administrators create a backup file in the unlikely event that a sensor fails and a
replacement sensor is needed. In such an event, the new sensor can be restored with the backup file.
To create a backup:
1 Click the Backup Sensor... Button.
2 When prompted, specify a location to save the backup.
The backup will be saved to the specified location on the client computer. Backups are saved as a single
archive that contains all of the files from the sensor.
To restore from a backup:
1
Click the Restore Sensor... Button.
2 When prompted, select a backup file to restore.
The backup file will be uploaded and then used to restore the sensor. Any files that were on the sensor
before the restore operation will be lost.
To restore a sensor to its factory default settings:
1 Consider making a backup.
Restoring factory defaults cannot be undone. It is recommended to make a backup before proceeding.
2 Click the Restore to Factory Button.
3 Reset the sensor.
After restoring factory defaults, it is necessary to reset the sensor before the changes will take effect. Use
the Reset Sensor Button or cycle the power to affect a reset.