LMI Gocator 2000 Family, Руководство пользователя

Страница: 105 / 194

Management and Recovery • 105 Gocator 2000 Family
Managing Files
The Files Panel can be used to manage configuration, template, and recording files:
1
4
5
6
7
8
9
2
3
Element Description
1 File Type Specifies the type of files to manage (Configuration, Profile Template, Replay Data).
2 File Name Field Used to provide a file name when saving files.
3 File List Displays the files that are currently saved in the sensor’s flash storage.
4 Save Button Saves currently loaded data to file using the name in the File Name Field.
5 Load Button Loads the file that is selected in the File List.
6 Delete Button Deletes the file that is selected in the File List.
7 Set as Default Button Sets the selected file as the default to be loaded at boot time.
8 Download Button Downloads the selected file to the client computer.
9 Upload Button Uploads a file from the client computer.
The following types of files can be saved and loaded:
File types
File Type Description
Configuration Contains the settings specified in the Setup, Measurement, and Output Pages.
Profile Template Contains profile template data, used for profile fixturing.
Example: Separate configurations required for different production runs
One set of equipment might be used for different purposes or with different constraints during separate
production runs. For example, width decision constraints might be loose during one production run and
tight during another depending on the desired grade of the part.
To manage a system with multiple configurations:
1 Configure settings for the first target object.
Use the Setup, Measurement, and Output Pages to configure settings for the first target.
2 Save the first configuration.
3
Configure settings for the second target object.
Use the Setup, Measurement, and Output Pages to configure settings for the second target.
4 Save the second configuration.
5
When production changes, load the desired configuration.
Select the desired configuration and click the Load Button. The configuration will be loaded and the
sensors will ready for production.