LMI Technologies chroma+scan 24 0 Series, Руководство пользователя

Страница: 42 / 48

<Name>Sensor 1</Name>
<SerialNumber>4294967295</SerialNumber>
<Enabled>0</Enabled>
<VertexView>0</VertexView>
<Orientation>0</Orientation>
<Clip>0</Clip>
<XMin>0</XMin>
<XMax>0</XMax>
</Sensor>
</Members>
</Group>
</Members>
</SensorGroup>
The example above specifies the settings for a system with four sensors. System-level
settings include the following entries:
Setting Description
Exposure Specifies whether high or low exposure is
used. This set the sensor speed to either,
120Hz, 90Hz or 60Hz
Video Contain options that are applicable only
in Video mode
Sensor Serial Number of the sensor from which
to show video data
Free Contain options that are applicable only
in Free mode
OutputBatchCount The number of profiles batched together
in a single message.
NOTE! Currently
unsupported.
CalibrationTarget Defines the calibration target geometry.
Needs at least three vertex sections.
Vertex
X Translation coefficient X in millimeters
Z Translation coefficient Z in millimeters
T Rotation coefficient in radians
Members Contains one or two groups
Group
Name Must be unique
Members Contains variable number of sensors