© 2003 Michael J Archer
v1.1
- 50 -
Chapter 3 –Video Explorer
To save a book mark all that you need to do is to set the video fragment to the position you wish to
remember, of course this is done by just clicking the green area which will be shown by a white line.
Then you just need to click one of the Red numbers 1 – 0.
This will then highlight the Green to a light shade as below shows, and dull the Red to show it has
been used.
To restore a book mark you only need to click the Highlight green bookmark number. By just moving
the mouse over the number that has been used you’ll get a
graphic to show you
the information where the bookmark was set.
If you select an already used Bookmark the system will prompt you for an overwrite option as below:
With the mouse over the Bookmarks window, making sure that the
“Bookmarks”
text is not grey, as
this needs to be the active window, you can use the right click to bring up a few options as shown
below:
The first option is to remove all bookmarks; the system will prompt you for a confirmation before this
happens as below shows.
The Select fragment option is used for selecting time interval (on graphical scale) between two events
previously saved into bookmarks. This is convenient way for defining and then saving fragments
of video database. The procedure may consist of the following steps:
1.
-
Find the start of event through play of search motion function.
2.
-
Save it for example into the first bookmark.
3.
-
Find the end of event through play of search motion function.
4.
-
Save it for example into the second bookmark.
Intelligent Security & Fire Ltd