© 2003 Michael J Archer
v1.1
- 17 -
Camera Name
Camera Contrast
Camera Brightness
Camera Saturation
Chapter 2 –Configuration
This should now give a picture in the box. Depending on the system you have, i.e. 4 8 12 16 camera
unit, you only need to select up to the amount you have installed. Leave unused cameras un-connected,
otherwise you will see Fault appear on the window and the windows will appear with a Blue
background: As below.
Each camera has a few additional setting which the user is able to modify.
The first setting is the Caption. This gives a meaningful name to each camera on the system. And will
be used on both the display for the camera, and also on the Bottom screen camera select Icons.
The
Contrast, Brightness
and
Saturation
slider, give you the ability to change the image of the camera
input. The Leviathan system works in a way that what you see on the screen is what the system will or
has recorded digitally. This means that we give a true “
What you see is what you get
”.
This setting set the maximum that a camera would be able to record too. If you want say 1fps for a
camera just set the slider to this value, and this camera will only be recorded at that rate.
This sets the colour of the text around the camera, used when the text information is lost in the picture.
After you have set the camera to the configuration, you are required to save the settings, by clicking the
graphic on the right of the screen, or the tick icon.
.
If you do not wish to save the settings then you just click the
icon. This will return you back to
the main system screen (
Figure 2)
Intelligent Security & Fire Ltd
