Livith METAL DRY GRAPH LINE, Руководство пользователя

Страница: 8 / 36

8
INSTALLATION SPECIFICATIONS
The installation of the device must take place avoiding that, in case of a fall arrest,
the deflection of the line leads it to come into contact with sharp edges or with
other elements that could contribute to its damage.
Once installed, anchoring devices may be subject to the capturing of atmospheric
discharges. It will therefore be the care and responsibility of the owner or person
responsible for the fall prevention system, to check according to the regulations
in force in this regard, whether or not the building is subject to the risk of lightning
and to take on the responsibility to protect the building with suitable measures
and systems suitably designed according to current regulations.
The installation of the anchoring devices must be carried out far from high voltage
cables, electrical systems and have no connections neither with these nor with
antennas or other systems that can enter into tension and act as conductors,
as the devices produced by Livith S.p.A. can accidentally take on an electrical
voltage. An accurate risk assessment is required in this regard.
In case of installation on sloping pitches, a snow stopping system must also be
installed near the anchorage to reduce the load of the snow agent on the device.
Livith S.p.A. declines any responsibility related to the decommissioning of the
system due to the failure to install snow stopping systems.
For further information, see the Warranty Terms and Conditions at the end of this
Manual.