Livith METAL DRY GRAPH LINE, Руководство пользователя

Страница: 18 / 36

18
SEE ASSEMBLY DIAGRAMS
Before proceeding with the installation of the anchoring system, Livith S.p.A.
recommends checking its components and the correspondence between their
characteristics and those reported in this manual.
If no such correspondence is found or damaged parts and / or devices are identified,
please contact Livith S.p.A. on the website
www.livith.it.
The following procedure is the only one possible for assembling the Livith S.p.A. Metal Dry
Line and does not require forcing the devices.
At the end of the installation, check that each part of the device is complete and intact.
Example :
INDICATIVE DIAGRAM: Assembled Metal Dry Line.
The following procedure relating to the Metal Graph Line is an example for the assembly
of the components of the line. For the assembly and fixing of the terminals, the relative
assembly instructions must be viewed.