10
ENG
MEMORY FUNCTION
1. The result of each measurement (blood pressure and heart
rate, date, time) is automatically stored in the memory of device.
MEASUREMENT RESULT WILL NOT BE SAVED IN CASE OF
THE NOTICE OF ERROR.
2. The memory device can save up to 90 measurements and
average of the last 3. When the number of measurements
exceeds 90, the oldest data is automatically replaced with the
following data measurements.
3. You can view the contents of the memory device by touching
the key M. The first time you touching the key M, the symbol “A” on the screen briefly displays the average value of all readings stored in
memory (Fig. 5). When you touch the key M again, the index “1” (the number of memory cells) displays briefly on the screen , then the result
will be the last measurement (Fig. 6).
The date and time of measurement will be alternately displayed in the lower left corner of the display.
Each time you touch the key M, the index of numbers of the memory cell will increase by one and then indicate the contents of the specified
memory location on the display.
PURIFICATION MEMORY OF THE DEVICE
It is necessary to touch the key M and hold it for more than 5 seconds in order to remove all stored measurement results from the memory of
device. The display shows symbols «Clr» and will clean the entire memory.
Fig.5
Fig.6
