6
ENG
INSTALLATION OF BATTERIES
1) emove the battery compartment and insert two AAA batteries, as shown in the diagram inside the com-
partment. Make sure that the polarity observed. Do not use excessive force when removing the battery
compartment cover.
2) Close the battery compartment cover.
Replace all the batteries when the display continuously displays the battery replacement indicator “
”,
or there is no indication. The replacement battery indicator does not show the degree of discharge. We
recommend using alkaline batteries.
SET THE CLOCK
In order to access in the mode of the date and time, touch the key M, holding it down
. The selected initial option will flash. The change in the
selected option occurs upward when you touch the key M.
Touch
to proceed to setting the next parameter, year / month / day / hour / minute.
If you do not make any action in the mode of setting the date and time more 1 minute, the device itself switches to display the date and time.
If you change the batteries, time and date will return to the original.
There is a possibility of measurement of pressure and pulse rate without setting date and time.
