9
ENG
In addition to the numerical result of the pressure is also displayed on the scale of the WHO (Fig. 4).
WHO scale is the scale of three-color classification derived values of blood pressure, as recommended
by the World Health Organization. Scale, being left on display, allows us to estimate the obtained figures
according to the classification: the pressure is normal, increased, or this is one of degrees of hyperten-
sion.
6.Touch the
– the unit turns off.
To re-measure repeat the steps in this section.
TO OBTAIN ACCURATE RESULTS NEEDED A BREAK BETWEEN THE MEASUREMENTS IN
ORDER TO RESTORE BLOOD CIRCULATION. WHY SPEND REPEATED MEASUREMENTS
NOT EARLIER THAN IN 3 MINUTES.
The result of each measurement (blood pressure and heart rate) is automatically stored in the
memory of device.
DATA IN MEMORY WILL BE SAVED EVEN IN THE DEVICE WITHOUT BATTERIES. IN ORDER
TO DELETE SAVED DATA FROM THE MEMORY DEVICE,FOLLOW THE STEPS DESCRIBED
IN THE “MEMORY FUNCTION”.
If the power is not switched off and the appliance is not used for 3 minutes, then switches off.
AUTOMATIC INFLATING
If the initial pressure level (190 mm Hg.) is insufficient or there is movement of the hand dur-
ing the measurement, the unit will stop measuring and inflate the cuff to the next higher level
of pumping. The device has 4 fixed inflation level of the cuffs: 190, 230, 270, 300 mm Hg.
Automatic inflating of the cuff is repeated until the measurement is completed successfully. This is not a malfunction.
FORCED RELEASE OF PRESSURE FROM THE CUFF
If during the measurement you need to relieve quickly the pressure in the cuff - touch
. The device release quickly the air from the cuff and off.
Fig.1
Fig.2
Fig.3
Fig.4
