Pre-Cut Value Gable Shed/Value Workshop Shed
ASSemBly InStruCtIOn mAnuAl
9
Assembly Instruction manual
© 2020 Little Cottage Co.
*PleASe nOte: A 10’X14’ WOrKSHOP SHeD WAS uSeD FOr PICtureS SHOWn - yOur lAyOut mAy VAry*
43.
Make sure the wall is flush on the end and put pressure
on the outside as shown, fasten with 3” nails.
44.
Fasten with 3” nails 16” on center.
45.
Make sure you have 48” or 60” (depending on the
building width) in between the door opening, 48” on 8’
wide buildings and 60” on 10’ and wider buildings.
46.
Continue with walls as shown.
47.
Continue with walls as shown.
48.
Fasten outside corner as shown with 2” nails.
