Pre-Cut Value Gable Shed/Value Workshop Shed
ASSemBly InStruCtIOn mAnuAl
17
Assembly Instruction manual
© 2020 Little Cottage Co.
*PleASe nOte: A 10’X14’ WOrKSHOP SHeD WAS uSeD FOr PICtureS SHOWn - yOur lAyOut mAy VAry*
91.
Drill a 5/16” hole as shown.
92.
Use the hammer again to tap on the top barrel bolt to
locate where to drill your 5/16” hole.
93.
Drill a 5/16” hole for the barrel bolt.
94.
Locate the latch. Install half of the latch, as pictured,
on one of the doors, with 1 1/4” screws.
95.
Line up and install the other half of the latch on the
opposite door.
96.
Locate the aluminum corner trim. Fasten the trim onto
all four corners of the building with white finish nails.
