Z8F3224 ZMOTION Development Kit
UM029501-0321
User Manual
4
Lenses
The Development Kit includes seven lenses. Two mounting options are supported
– Clip on and PCB
Mount. The following tTable 2 describes the lenses that are included with the Kit.
Part Number
Description
Typical Applications
ZNCL10IL
9mm Wall Mount 80
o
x30
o
Clips on to pyroelectric sensor
6 beams (X); 2 beams (Y)
7m range
Wall mount for power management
•
Proximity or entrance detection
•
Kiosks/Vending
•
Product
display’s
ZNCL3B
9mm Wall/Ceiling Mount (60
o
x60
o
)
Clips on to pyro-electric sensor
4 beams (X); 2 beams (Y)
3m range
Proximity or entrance detection
•
Kiosk/Display Counters
•
Vending
•
HVAC
ZNCL10R
9mm Wall/Ceiling Mount (circular 360
o
)
Clips on to pyro-electric sensor
90
o
Cone
14 zones with dual pyro
5m range
Room Occupancy and Proximity Sensing
•
Lighting and HVAC Control
•
Kiosk/Display Control
•
Vending/Appliance Power Management
ZNCL10S
9mm Wall/Ceiling Mount (15
o
x15
o
)
Clips on to pyro-electric sensor
2 beams (X); 1 beam (Y)
12m range
Barrier or entrance detection
•
Kiosk/Display Counters
•
Vending
•
HVAC
•
Directional detection
ZNCL926
Clip-on 15mm (360
o
)
26 Segments
5m height, 2.1:1 Floor diameter to height ratio
Room Occupancy and Proximity Sensing
•
Lighting and HVAC Control
•
Kiosk/Display Control
•
Vending/Appliance Power Management
ZNCL11
Wall/Ceiling Mount 104
o
(X), 37o(Y)
Circuit board mount
Black rectangular lens with flat front
32 detection zones
4m range
Wall or ceiling mount for power
management
•
Room occupancy and proximity
sensing
•
Power management
•
Display power management
ZCWM05GIV1
Ceiling/Wall Mount Array (360
o/
180
o
)
Circular lens with 24mm x 24mm square base
Board mount clip-in
9m height/range
Wall or ceiling mount for office or meeting
room lighting and HVAC control
•
Room Lighting Control
•
Local HVAC Control
Table 2. Lenses Included with Kit
