Z8F3224 ZMOTION Development Kit
UM029501-0321
CONNECT ZMOTIONL400 DEV BOARD AND PC
User Manual
20
12. The red LED (D3) should start flashing 1 second on, 1 second off while the application waits
for the PIR sensor to stabilize.
13. If a serial terminal application is running and connected to the Zilog USB Serial Device, the
messages similar to those shown in the following figure will be displayed.
Figure 18. Messages Displayed on Tera Term Serial Capture Program
14. Each time motion is detected, the terminal will display
“
Motion Detected
”.
15. Other status messages are sent out the serial port. The amount of status information sent can be
selected by setting USE_DEBUG_STATE to 0, 1, 2 or 3 in ProjectConfig.h.
