Z8F3224 ZMOTION Development Kit
UM029501-0321
User Manual
27
Appendix C
Installing the USB SmartCable Driver
1. Connect the USB Smart Cable to the host PC. A Windows message appears, stating
Driver Software Installation
.
2. Windows automatically searches for the driver. This process can take a while to
complete. However, because there is no option to terminate this process immediately,
Zilog advises waiting for the search to complete. If the driver was previously installed
on your system, Windows automatically installs the USB Smart Cable driver. If this is
the case, skip ahead to Step 8. If the driver was not found, close the Search dialog
and proceed to Step 3.
3. Go to the Windows Start menu and, in the Search programs and files field, enter
Device Manager. The Windows Device Manager should appear in the list of returned
items in your search; click this item to launch the Device Manager.
4. A selection label as
Other devices
should appear in the list of hardware devices
currently running in the Device Manager. Click the arrow to the left of Other Devices
to display these additional devices.
5. Right-click USB Smart Cable to select Update Driver Software, which will display the
Update Driver Software - USB Smart Cable dialog.
6. Select the Browse my computer for driver software option in this dialog, then browse
to one of the following driver directories:
32-bit systems:
<ZDS II Installation Directory>\device drivers\USB\x32
64-bit systems:
<ZDS II Installation Directory>\device drivers\USB\x64
7. Click Next to install the driver. In 32-bit systems, the Windows Security dialog will
appear: click Install this driver software anyway.
8. Click Close after the Wizard finishes the installation.
