Z8F3224 ZMOTION Development Kit
UM029501-0321
CONNECT ZMOTIONL400 DEV BOARD AND PC
User Manual
19
8.
If using an Encore! SmartCable, set your Target VDD to “By External Source”
9. If the Debug icons are not displayed, as in the following figure, right-click in the empty grey area
under the icons and select
Debug
and
Workbook Mode
.
Figure 15. Debug Icons
10. Hover the mouse over each icon to display its function. Click the Rebuild All icon. ZDS II will build
the project using the current versions of all source files and generate the necessary output files. If
there were no errors detected during the build, a message similar to the one in the following
figure will be displayed.
Figure 16. Build Succeeded Message
11. Click the
Go
icon. ZDS II will connect to the target MCU through the Encore! SmartCable or USB
SmartCable, download the project to its Flash memory, reset the MCU, and start running the
application. A message similar to the one shown in the following figure is displayed.
Figure 17. Message Displayed upon Connecting to Target MCU
