Lite-Check INSPECTOR 920, Руководство по эксплуатации

Страница: 21 / 36

LITE-CHECK INSPECTOR 920
Page: 21 of 36
Circuit Condition Messages
Note: LITE-CHECK automatic testers are “live” in that any changes in circuit conditions
are immediately detected and displayed by the tester.
Display Details
“GOOD” – Circuit Passes
The circuit indicator light is on. The digital display
indicates the circuit under test, current draw, voltage
and a
GOOD circuit.
“ OPEN” – Open wire and no amperage load
The panel circuit indicator light is on and the
“
OPEN ” fault alarm sounds. The digital display
indicates the circuit under test, current draw, voltage
and an
OPEN circuit fault.
“SHORT” – Circuit wires are in contact
The panel circuit indicator lights illuminate for all
shorted circuits, and the “
SHORT ” fault alarm
sounds. The digital display indicates the circuit
under test, current draw, voltage and a
SHORTED
circuit fault.
“CHASSIS SHORT” – Circuit wire is in contact
with chassis, frame, return or ground check.
The panel circuit indicator light is on and the
“
CHASSIS ” fault alarm sounds. The digital display
indicates the circuit under test, current draw, voltage
and a
CHASSIS circuit fault.