Lissmac MULTICUT 800, Руководство по эксплуатации

Страница: 28 / 38

28
7.6 Oil change on the feed drive

Remove cover (Pos. 55)

Screw out the ventilation stopper (Pos. 56) from the feed
drive

Remove the drain screw (Pos. 63) under the joint cutter

Drain the oil and return the screw (Pos. 63)

Refill with 0.8l synthetic mineral oil CLP PG VG 220
(Aral = Degol GS 220, Esso = Glycollube 220,
Mobil = Glygoyle 30, Castrol = Alphasym PG 220)

Screw in the stopper (Pos. 56)
7.7 Check the oil level in the hydrostatic drive

Remove the side wall (Pos. 59)

The leveling container (Pos. 60) must be filled to the
middle of the drain hose.
If required, add drive oil 20W50.
60
63