Lissmac MULTICUT 800, Руководство по эксплуатации

Страница: 29 / 38

29
7.8 Control motor cooling water
Attention! Danger of burning!
Open the cover on the cold motor.

Open the cover of the cooler on the upper right of the
control console, the filling level must be visible on the
cooling water filling neck.

Remove cover (Pos. 55)

The cooling water tank (Pos. 61) must be filled to the
marking on the side. Attention! The fill level of the suction
tank does not indicate the cooling water level!
Note Check frost protection.
7.9 V-belt tension
7.9.1 V-belt tension on the saw blade shaft
7.9.1.1 Check

Remove covering flap (Pos. 49)

With a medium amount of strength, the fan belt can be
pressed approx. one thickness of the fan belt inwards.
7.9.1.2 Readjustment
Note Ensure that the tension on the left and right is equal using the
scale (Pos. 58.6).

Lightly loosen screws (Pos. 57)

Set the tension at the screw (Pos. 58)
Clockwise turn —> increases V-belt tension

Retighten screws (Pos. 57)
58.6
57