Lissmac MULTICUT 800, Руководство по эксплуатации

Страница: 8 / 38

8
1.5.2 Special work while using the machine and maintenance work as well as troubleshooting during
operation; disposal
1.5.2.1 Follow all setup, maintenance, and inspection activities and schedules
prescribed by the operating manual, including all information about the
replacement of parts / assemblies! These activities may only be carried
out by experts.
1.5.2.2 Inform operating personnel before beginning special and maintenance
work! Name a supervisor!
1.5.2.3 If the machine is completely turned off during maintenance and repair
work, it must be secured against unexpected application of power.
1.5.2.4 Before cleaning the machine with water or steam jet (high-pressure
cleaner) or other cleaning agents, cover/glue all openings in which no
water/steam/cleaning agent should penetrate due to safety and/or
functional reasons. Electric motor and switches are especially at risk.
1.5.2.5 After cleaning, remove the covers/tape completely!
1.5.2.6 During service and repair work, always tighten loose bolt joints!
1.5.2.7 If dismantling is required for fitting, servicing and repair, the safety fittings
must be remounted and checked immediately following the service and
repair work!
1.5.2.8 Please ensure the safe, environmentally friendly disposal of operating
and auxiliary materials and replacement parts!
1.6 Safety instructions for special types of dangers
1.6.1 Electric power
1.6.1.1 Use only original fuses with the specified current rating! In case of
problems with the electrical power supply, turn the machine off
immediately!
1.6.1.2 Work on the electrical operating equipment of the machine may only be
carried out by electricians or trained personnel under the management
and supervision of an electrician, and in accordance with the rules of
electronics.
1.6.1.3 The machine's electrical equipment must be inspected/checked regularly.
Faults such as loose connections or scorched cables must be corrected
immediately.
1.6.1.4 There is a high power draw when the ignition is active.
1.6.2 Dust
1.6.2.1 Follow applicable national regulations!
1.6.3 Noise
1.6.3.1 Wear specified personal hearing protection!