Lissmac MULTICUT 800, Руководство по эксплуатации

Страница: 22 / 38

22
6. Operation with waste water suction
6.1 Operation of waste water suction (only MULTICUT 800 GH)
Exhaust can be turned on and off using the lever (Pos. 39)
Lever down = exhaust on
Lever high = exhaust off
6.2 Clean filter in dirty water container (Pos. 42) (several times daily)
Attention! Switch off the motor of the floor cutter.

Lift the exhaust using the lever (Pos. 43)

Pivot out the collection container by the handle

Remove the sieve from the container

Clean and replace the sieve
(remember the latch)

Return the collection container into position

Lower using the lever (Pos. 43)
43
39
50