Lissmac MULTICUT 800, Руководство по эксплуатации

Страница: 14 / 38

14
Pos. 10 Water temperature
Pos. 11 Motor oil pressure
may not burn during operation!
Pos. 12 Emergency stop switch
Pos. 13 Battery charging control
may not burn during operation!
Pos. 14 Fuses
Pos. 15 Plug sockets for lamps
Pos. 16 Water pump on-off
Pos. 17 Speed control for diesel motor
Pos. 18 Controller for forward speed cut-in movement of the saw
blade
Pos. 19 Saw blade "down" "up"
Pos. 20 Feed lever forwards - backwards
Pos. 21 Ignition switch
Pos. 22 Brake
Attention! Movement only possible when the brakes are released!
Note Only operate the brakes when the lever (Pos. 20) is in the
neutral position.
Lever lowered = brake released
Lever up = brakes locked
Pos. 23 Coupling for feed movement
Note Only operate the coupling when the lever (Pos. 20) is in the
neutral position.
Lever up = feed inactive
Lever lowered = feed active
Pos. 24 Diesel motor speed
Pos. 25 Steering suspension