Lissmac COMPACTCUT 201 D, Руководство по эксплуатации

Страница: 13 / 84

13/84
2.3. Choice of personnel and qualification; fundamental obligations
Operators must be aged 18 or above and they must be mentally and physically capable of operating
the floor saw. All persons must be instructed in the operation and be expressly assigned by the
employer with the operation of the floor saw.
Establish the responsibilities of the personnel for operation, set-up, service and repair.
Ensure that only trained and authorised personnel work with the machine.
The operator must wear personal protective equipment such as safety shoes, gloves, eye protection
and hearing protection which comply with the local safety regulations.
Tell people not working with the machine to leave the working area. Block access to the work area if
necessary.
The operator must ensure with all movements of the floor saw that he does not endanger himself and
other persons. All obstructions which hinder the work procedure or the implementation of the machine
must be cleared at the place of work.
Work on the electrical components of the machine may only be carried out by a certified electrician or
by persons who are being instructed in such work under the direction and supervision of a certified
electrician in accordance with regulations.
The operator must be named as the person responsible for traffic-related regulations and make it
possible for him to reject unsafe instructions by third parties.
Only allow personnel being trained, instructed or those completing an apprenticeship to work on the
machine under the constant supervision of an experienced person.
2.4. Safety notes regarding the operating phases
2.4.1. Transport, assembly, and installation
Transport, set-up and installation on/with the floor saw must only be carried out off when the ignition
switch is switched off.
Remove saw blade before transport.
Transport may only take place if all parts on the machine are tightly fastened and the dropping of
individual parts is impossible.