Lissmac COMPACTCUT 201 D, Руководство по эксплуатации

Страница: 33 / 84

33/84
CAUTION
Risk of burns
Engine parts and tools become hot during operation and can cause burns

Avoid skin contact

Wear personal protective equipment
 Allow the engine to cool down before working on the device
6.2. Start preparations
NOTICE
Cutting without obstacles
Damage to objects in the cutting area or to the saw blade.

All obstacles must be removed from the cutting area

Provide good lighting for the work area
Pay attention to a straight cut to avoid tilting of the saw blade.
Execute all steering and control commands slowly, in a controlled and even way.
If deep cuts have to be made, this must be done in several steps.
The joint should be pre-cut with a smaller (and wider) saw blade and then deepened with a larger (and
narrower) saw blade.
Initial preparation
In order to use the dry extraction system safely and properly, the following conditions must be met:
1. Check the dry extraction for damages, loose screw connections and for the completeness of the
attachments parts
2. Connect a reliable water supply.
3. Mounting a suitable saw blade.
4. The water cooling system is functional
5. No objects or persons in the immediate vicinity of the saw blade.
6. Set the steering rod in alignment with the saw blade.
7. Lift the saw blade up - no floor contact!