Lissmac COMPACTCUT 201 D, Руководство по эксплуатации

Страница: 39 / 84

39/84
6.6. Cutting with the floor saw
Pay attention to a straight cut to avoid tilting of the saw blade.
Carry out deep cuts in several passages.
Do not use any excessive pushing force.
Carry out all movements when handling the machine in a controlled manner which is not abrupt or jerky.
Always ensure you have secure footing and a clear view.
Sequence 1. Put the floor saw in position.
2. Engage the parking brake.
3. Fold steering rod down.
4. Align the steering rod and saw blade on the cutting line.
5. Start the motor.
6. Move the throttle to the stop.
7. Open the ball valve on the water tank or the water connection.
8. Slowly lower the blade to cutting depth using the hand wheel.
9. Release the parking brake.
10. Initiate forward motion with the handlebar.
11. Cut with adjusted speed of forward motion.
WARNING
Destruction of the saw blade due to lack of cooling water
If the saw blade is not supplied with sufficient cooling water for wet cutting, there is a risk of overheating
and parts may break out. The grinding dust is not sufficiently bound.

Ensure that the saw blade cooling is supplied when cutting.

Do not carry out any dry cutting.
6.7. Safe parking of the machine
Sequence 1. Park the machine on a level surface capable of carrying the load.
2. Activate the parking brake.
3. Move the throttle back completely.
4. Set ignition switch to 0/OFF (CC201P/PL)
5. Close the petrol lever.