Lippert Components Ground Control 2.0 Скачать руководство пользователя страница 93

Страница: 93 / 166

Rev:11.08.19

Page 93

CCD-0001573-08

Touch Pad Diagram - OneControl App from MyRV

NOTE:

The One Control™ Leveling App is available on iTunes® for iPhone® and iPad® and also on Google

Play™ for Android™ users.

Callout

Description

Jack Buttons - Select front, rear, right and left jacks to be operated depending on mode.

Jacks available to be operated will be highlighted in blue. In Standard Mode (Fig. 11), only

front and rear jacks are available to be operated. In Manual Mode (Fig. 13), all jacks are

available to be operated.

Enter - Push to activate various modes.

Info - Displays system information, e.g., angle, jack stroke, software version.

Auto Retract - Enters Auto Retract mode to retract all jacks.

Manual Mode - Enters Manual Mode to manually operate jacks.

Home Icon - Returns screen to home page.

Up and Down Arrows - Scroll through options on screen.

Retract - Retracts jacks in several modes. Jacks available will be highlighted in blue.

Extend - Extends jacks in several modes. Jacks available will be highlighted in blue.

Auto Level - Starts the Auto Level sequence.

Auto Hitch - Returns trailer to previous hitch height for reconnecting to tow vehicle.

Fig. 11

Jack buttons

in Manual Mode

(See Fig. 13)

Front

Jacks

Rear

Jacks

Front

Jacks

Left

Jacks

Rear

Jacks

Right

Jacks

Содержание Ground Control 2.0







































































































































































Результаты поиска

Содержание Ground Control 2.0

Отзывы:

Похожие инструкции для Ground Control 2.0

Бренды по названию

Популярные бренды

Lippert Components Ground Control 2.0, Руководство владельца

Результаты поиска

Содержание Ground Control 2.0

Отзывы:

Похожие инструкции для Ground Control 2.0

Бренды по названию

Популярные бренды