background image

Operating instructions  T80PL 2010                               9/21                                         (01/2010)

3.

Safety and special instructions

ATTENTION!

Although  your  lift  complies  with  the  latest  safety  regulations,  it  is

essential to follow the safety instructions below:

Put the lift into operation only after reading the operating instructions 
and adhere to the operating instructions.

Never exceed the permissible loading capacity.

(Residual danger: breakage/failure of the brakes)

Operate the lift only when seated 
(exceptions: see transport profile).

Do not use the lift in the case of fire.

Do not allow loosely hanging articles of clothing to get near to the 
running rail and the platform when the lift is moving.

(Residual danger: trapping of loose clothing, etc.)

Fold up the lift when not in use.

(Residual danger: tripping over)

Never place your hands near the running rail when the lift is moving.

(Residual danger: crushing)

Be sure to observe the track in the direction of travel when travelling.

(Residual danger: crushing)

Do not remove, cut through or deform parts of the lift or cladding; do 
not actuate operating elements with undue force.

Do not push the barriers with undue force, neither while travelling nor 
when raising or lowering them.

(Residual danger: falling from the platform)

Stop the drive command immediately if there are obstacles or articles 
in or on the track or platform or in the driving area.

(Residual danger: crushing)

Do not remove any labels or signs belonging to the lift.

Содержание T80






















Отзывы:

Похожие инструкции для T80