Explo Trainer
User’s Manual
Version 1.1 | 18/06/19
Page 16
Inspection and maintenance
In order to ensure trouble-free training sessions, we recommended that you regularly carry out the
following checks, preferably before every training session:
•
Inspect the system for damage to the casing or cables. Do not use the system if the cables are
damaged or if the casing is damaged to such an extent that one could expect the system not to
function properly or to pose a potential safety risk to the student or instructor. In that case,
contact the manufacturer and have the system repaired.
•
Check the proper functioning of the system. Switch on one transmitter, and use the Student Unit
to check that it is working properly. At the same time, check whether the measured value is being
sent to the Instructor Unit. Then do the same for the other transmitters.
•
Make sure that the system is adequately charged when starting a training exercise. Low battery
power can give rise to unwelcome training interruptions.
•
The usable lifetime of the batteries is limited. An average battery will last for 1 to 2 years. If the
length of time that one can work with the unit on a fully charged battery diminishes noticeably,
then we recommend that you have the batteries replaced. In order to get maximu m benefit from
the system, we recommend that all the batteries are replaced at the same time. The batteries
will also last longer if you use the system regularly, and regularly recharge the batteries. If the
system is not used for a period of one month or longer, you should completely charge the set
before using it.
