Explo Trainer
User’s Manual
Version 1.1 | 18/06/19
Page 15
Accepting or declining settings on the Student Unit
Whenever a Student Unit receives setup
information from any Instructor Unit in the
neighborhood, the Student Unit will ask for
confirmation by showing a settings menu
on the display (figure 4.2).
Since all Student Units in the neighborhood
will receive this information, the user can either accept or decline these settings.
The user can accept the settings by pressing and holding the po wer button on the Student Unit:
-
Be sure that the Student Unit is switched on and that you see the settings display
-
Press and hold the power button until the Student Unit goes into measurement mode
The Student Unit now stores the received settings.
The user can decline the settings by pressing the power button shortly on the Student Unit:
-
Be sure that the Student Unit is switched on and that you see the settings display
-
Press the power button shortly until the Student Unit goes into measurement mode
The Student Unit doesn’t store the received settings and continues with the current settings.
Figure 4.2: Setup menu on Student Unit
