Linux MEGAsys, Руководство пользователя

Страница: 85 / 108

81
Remote Alarm Settings
Remote Alarm Setting functions give the administrator the opportunity to change alarm functions from a
remote site.
Figure 14-36: Remote Alarm Settings
The operation of remote alarm setting is the same as with local setting.
Once you have added all the alarm modes, click “ OK ” in the right corner to save the changes to the
Host and make them effective.
Remote Alarm Log Viewing
Here all the detailed logs about the alarms will be listed out, including the cause, triggered time and the
descriptions of the triggering condition. Through the use of the logs you will be able to view the status of
all of the alarms conveniently. And to delete an unnecessary alarm log, check the log on the right side
first, then click “ Delete ” to delete the selected alarm log.
Click “ Alarm Log ” , and a new window will appear as below:
Figure 14-37: Remote Alarm Log
If you would like to delete all logs, click in the checkbox next to “ Select All ”, then press “ Delete ”
, and click “ OK ” in the pop-up inquiring window.
Figure 14-38: Delete Alarm Log Remotely