Linux MEGAsys, Руководство пользователя

Страница: 43 / 108

39
Alarm Digital Output Triggering
Alarm Digital Output may activate the digital output at the time of detecting alarm. Follow the instructions
to set the Digital Output.
1. Click the “
Alarm
” Tab.
2. Select the “ Camera ”.
3. Select a “ Trigger Period ”.
4. Click the “ Dout ” Tab.
Figure 8-10: Output Port Tab
5. Select an Dout.
6. Tick off “ Enable / Not-Enable ”, the icon with a tick is “ Enable ”.
Figure 8-11: Output Port Field
7. Select the “ Delay ” time, with a unit of seconds; the delay time may be set from 0 to 999 seconds.
8. Under the “
Duration
”, there are settings of 0 to 999 seconds to choose from. A setting of 0 seconds means
permanent triggering.
9. Then click “ Add ” , and the window below will show “ Dout ” with the selections made.
10. Click “ Apply ” , and “ OK ” .
Figure 8-12: Output Port settings
The user could also modify an alarm that has already been set; after changing the content, please click “ Modify ” to
confirm — you could also move the cursor “ up ” and “ down ” to adjust the sequence of alarm
responses, or click “ Del ” to eliminate unnecessary alarm responses.
the Active
Duration
the Delay Trigger
Tick off “Enable/
Not-enable”