Linux MEGAsys, Руководство пользователя

Страница: 41 / 108

37
Alarm Voice Triggering
The Alarm Voice setting will provide a voice warning message to users at the time of detecting the alarm
condition. Follow the instructions below to set the Alarm Voice:
1. Click the “ Alarm ” tab and select the appropriate triggering event for alarm recording (“ Camera ”, “ Din ”,
or “ Disk full ”, “ Disk failure ”, or “ No signal ”).
2. Specify the desired “ Trigger Period ”.
3. Click the “ Voice ” Tab and type in the “ Telephone Number ”; specify the area code if it is a long distance
call, and if an extension number is required, please add “ ,,, ” followed by the extension number. A total of
14 bytes may be used.
4. “ Delay ” seconds means how many seconds you’d like to delay before the Alarm Voice is activated. A
period of 1 to 10 seconds may be set (see picture below).
5. “ Repeat Times ” is used to set the number of times you’d like to trigger the alarm; 1 to 10 times can be set
(see picture below).
Figure 8-7: Voice Tab
6. Then click “ Add ” ; the drop-down window will show “ Voice ” with the selections made.
7. Click “ Apply ” , and “ OK ” .
Alarm Fax Triggering
The Alarm Fax setting will allow a fax warning message to be sent at the time of detecting an alarm
condition. Follow the instructions below to set up Alarm Fax:
1. Click the “
Alarm
” tab and select the appropriate triggering event for alarm recording (“
Camera
”, “
Din
”,
or “
Disk full
”, “
Disk failure
”, or “
No signal
”).
2. Select a “
Trigger Period
”.
3. Click the “
Fax
” Tab
4. Type in the “
Fax Number
”; if it is along distance call, please add the area code..
5. Choose from the “ Send ” drop-down list how many pictures you’d like to fax; 1 to 30 pictures may be
chosen (see picture below).
Telephone
Number
Delay