Linux MEGAsys, Руководство пользователя

Страница: 40 / 108

36
Figure 8-4: Sound Selection Window
6. Choose a .wav file from the above window and click “OK”.
7. Click “ Play ” to play the file.
8. Select how many times you would like to repeat the alarm sound (up to 10 times).
9. Then click “ Add ”.
10. Click “ Apply ” , and “ OK ” .
Alarm Message Triggering
Alarm Message may show additional information at the time of detecting the alarm condition. Follow the
instructions below to set the Alarm Message.
1. Click the “ Alarm ” Tab first.
2. Select the “ Camera ”, “ Din ”, “ Disk full ”, “ Disk failure ”, or “ No Signal ”.
3. Select a “ Trigger Period ”.
4. Click the “ Message ” Tab.
Figure 8-5: Message Tab
5.
Then click “Add” , the window below will show “Message”.
6. Click “ Apply ” , and “ OK ” .
Once this function is enabled and users have enabled Motion Detection on that particular camera, a
pop-up screen will appear (as below) to warn users that the DVR has detected motion.
Figure 8-6: Message Pop-up Warning
7. Then users may click the “Confirm” button.