Chapter4
Use
29
Network Storage System wth 2 Bays
After the Network Storage System beeps once and
the appropriate USB LED powers off, disconnect the
device.
You can also use the Network Drive Mapping Utility to
remove the device. This is explained in the following
section, “How to Use the Network Drive Mapping Utility”.
How to Use the Network Drive Mapping
Utility
Any user can use the Network Drive Mapping Utility to do
the following:
Map a shared folder to a drive letter on a computer
Map a USB storage device to a drive letter on a
computer
Safely remove a USB storage device from the Network
Storage System
(If you do not have this utility installed, you can still use
Windows to manually map a shared folder or USB storage
device to a drive letter. Refer to Windows Help for more
information.)
If the utility has not been installed, run the Setup Wizard.
Refer to “Chapter 2: Configuration Using the Setup
Wizard”.
System Tray Icon
While the utility is running, its icon is displayed in the
system tray, which is located in the lower right corner of
your desktop.
System Tray Icon
If the utility is not running, proceed to the “Desktop Icon”
or “Program Folder” section for information on how to
activate the utility.
How to Map a Shared Folder
Right-click the system tray icon.
Right-Click Icon
Click
Shared Folder Mappng
.
2.
•
•
•
1.
2.
The
Shared Folder Mapping
screen appears. Select the
appropriate Network Storage System.
Shared Folder Mapping
Select the appropriate shared folder. If you do not see
the folder you want, click
Refresh
.
Keep the default drive letter, or select a different letter
from the drop-down menu. Then click
Map
.
The shared folder automatically opens, and a new
window appears to notify you that the shared folder
has been mapped. Click
OK
.
Shared Folder Mapped
On the
Shared Folder Mapping
screen, click
Close
.
Double-click
My Computer
. The shared folder is
displayed as a network drive.
How to Map a USB Storage Device
Right-click the icon in the system tray.
Click
USB Devce Mappng
.
The
Map Network Drive
screen appears. Keep the
default drive letter or enter a different letter in the
Drive
field.
Map Network Drive
Keep the default,
Reconnect at logon
, if you want the
USB storage device to re-connect automatically.
Click
OK
.
Double-click
My Computer
. The USB storage device
displays as a network drive.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
5.
6.