![background image](http://html1.mh-extra.com/html/linksys/nas200/nas200_user-manual_1925024006.webp)
Chapter1
Product Overview
2
Network Storage System wth 2 Bays
USB 2
The USB 2 port connects to your second
USB storage device. Press the USB 2 button
to eject the device from the USB 2 port. After
the Network Storage System beeps once and
the USB 2 LED powers off, you can remove the
device.
RESET
The RESET button has two functions:
To reset the network settings, such as
the IP address, of the Network Storage
System, press and hold this button for
two seconds. The Network Storage
System resets to DHCP and tries to
get an IP address from the DHCP
server on your network. If there is no
DHCP server on your network, the
Network Storage System will be set to
its default IP address,
69.254.xx.xx
(the x’s represent randomly generated
numbers). The Network Storage System
beeps once to indicate that the reset
has occurred.
To reset the password of the Network
Storage System to its default value
of admin, press and hold this button
for 10
seconds. The Network Storage
System beeps twice to indicate that the
reset has occurred.
•
•
Drive Bay Doors
The drive bay door covers the opening of the drive bay,
which holds the hard drive. Push together the clips to
remove the drive bay door. Disk 1 is inserted into the
upper bay, and Disk 2 is inserted into the lower bay.
Notification Sounds
The Network Storage System emits sounds to indicate
different activities or status information.
Notfcaton Sounds
Sound
Meanng
1 beep
Power
or
Reset
button
pushed
USB device ready to be removed
2 beeps
Reset button pushed and held for over
10 seconds
3 beeps every
15 seconds for 3
minutes
Available disk capacity is less than 2%
of total capacity or the number you set
through the web-based utility (2 or 5 GB)