Chapter2
Configuration Using the Setup Wizard
6
Network Storage System wth 2 Bays
Select the appropriate configuration for your drive
usage:
NOTE:
If you change the drive configuration
setting (for example, from Separate Disks to
RAID 1), both drives will be reformatted and all
current data will be erased. Back up any pre-
existing data before reconfiguring your drives.
Maxmum Storage - Separate Dsks
Drives seen
separately.
Maxmum
Storage
-
Multple
Dsks
(JBOD/LVM)
Drives seen as a single virtual drive.
Maxmum Securty - Mrrorng (RAID )
Requires
two hard drives.
Maxmum Speed - Strpng (RAID 0)
Requires
two hard drives.
Click
Next
.
Select Drive Configuration
5.
–
–
–
–
Review the new settings. If they are correct, click
Save
.
If you would like to change them, click
Back
to return
to the previous screen.
Confirm New Settings
To confirm that you want to format your drives and
erase all data on them, click
Next
.
WARNING:
Before you format drive(s), back
up pre-existing data because all data on
your drive(s) will be erased when they are
formatted.
If the drives have been previously formatted by the
Network Storage System, click
Skp
to continue
without reformatting.
Confirm Formatting
6.
7.