Linksys EtherFast BEFW11P1, Руководство пользователя

Страница: 7 / 47

Etherfast
®
Wireless AP + Cable/DSL Router with PrintServer
8
Instant Broadband TM Series
Infrastructure mode also supports roaming capabilities for mobile users. More
than one BSS can be configured as an Extended Service Set (ESS). This con-
tinuous network allows users to roam freely within an ESS. All PCs using an
Instant Wireless
TM Network PC Card within one ESS must be configured with
the same ESS ID and use the same radio channel.
Before enabling an ESS with roaming capability, choosing a feasible radio
channel and optimum position of the Wireless AP + Cable/DSL Routers is rec-
ommended. Proper Wireless AP + Cable/DSL Router positioning combined
with a clear radio signal will greatly enhance performance.
7
Connecting the EtherFast
Wireless AP + Cable/DSL Router to
Your Network
Unlike a simple hub or switch, the setup of the Wireless AP + Cable/DSL
Router consists of more than simply plugging everything together. Because the
Router acts as a DHCP server for your Network, you will have to set some val-
ues within the Router, and also configure your networked PCs to accept the IP
Addresses the Router chooses to assign them.
You will need the following values from your ISP in order to install the
Wireless AP + Cable/DSL Router:
• Your broadband-configured
PC’s fixed Internet IP Address
(if applicable)
• Your broadband-configured
PC’s Computer Name and Workgroup Name
• Your Subnet Mask
• Your Default Gateway
• Your Primary DNS IP address
Whoever installed your broadband access should have left this information
with you. If not, call your ISP and they will be able to supply you with it.
Static IP Addresses
A Static IP address is an IP address permanently assigned
to a computer in a TCP/IP network. Static IP addresses are usually assigned to
networked devices, which are consistently accessed by multiple users, such as
Server PCs, or printers. If you are using the Router to share your cable or DSL
Internet connection, contact your ISP to see if they have assigned your home or
business a Static IP address. You will need that address during the Router’s con-
figuration.
}
Only if applicable
Overview
About Static & Dynamic IP Addresses
Roaming