background image

Linksys E2100L

Appendix F: Software End User License Agreement

64

Advanced Wireless-N Router

offensive or inappropriate .  Cisco makes no representations 
concerning any content contained in or accessed through 
the  Technology,  and  Cisco  will  not  be  responsible  or 
liable for the accuracy, copyright compliance, legality or 
decency of material contained in or accessed through the 
Technology .  

TO  THE  EXTENT  NOT  PROHIBITED  BY  APPLICABLE 
LAW,  ALL  IMPLIED  WARRANTIES  AND  CONDITIONS 
OF 

MERCHANTABILITY, 

SATISFACTORY 

QUALITY, 

NONINFRINGEMENT  OR  FITNESS  FOR  A  PARTICULAR 
PURPOSE  ARE  LIMITED  TO  THE  DURATION  OF  THE 
WARRANTY  PERIOD .  ALL  OTHER  EXPRESS  OR  IMPLIED 
CONDITIONS,  REPRESENTATIONS  AND  WARRANTIES  ARE 
DISCLAIMED . Some jurisdictions do not allow limitations 
on  how  long  an  implied  warranty  lasts,  so  the  above 
limitation  may  not  apply  to  You .  This  limited  warranty 
gives  You  specific  legal  rights,  and  You  may  also  have 
other rights which vary by jurisdiction .

Disclaimer of Liabilities.

  TO THE EXTENT NOT PROHIBITED 

BY APPLICABLE LAW, IN NO EVENT WILL CISCO BE LIABLE 
FOR ANY LOST DATA, REVENUE OR PROFIT, OR FOR SPECIAL, 
INDIRECT,  CONSEQUENTIAL,  INCIDENTAL  OR  PUNITIVE 
DAMAGES,  REGARDLESS  OF  THE  THEORY  OF  LIABILITY 
(INCLUDING NEGLIGENCE), ARISING OUT OF OR RELATED 
TO  THE  USE  OF  OR  INABILITY  TO  USE  THE  PRODUCT, 
SOFTWARE  OR  ANY  SERVICES  PROVIDED  IN  RESPECT 
OF  SUCH  PRODUCT  OR  SOFTWARE,  EVEN  IF  CISCO  HAS 
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES .  
TO  THE  EXTENT  NOT  PROHIBITED  BY  APPLICABLE  LAW, 
IN  NO  EVENT  WILL  CISCO’S  LIABILITY  EXCEED  THE 
AMOUNT PAID BY YOU FOR THE PRODUCT .  IF YOU LIVE 
IN  THE  EUROPEAN  UNION,  REFERENCES  TO  “SPECIAL, 
INDIRECT,  CONSEQUENTIAL,  PUNITIVE  OR  INCIDENTAL 
DAMAGES”  SHALL  MEAN  ANY  LOSSES  WHICH  (i)  WERE 
NOT REASONABLY FORESEEABLE BY BOTH PARTIES, AND/
OR (ii) WERE KNOWN TO YOU BUT NOT TO US AND/OR (iii) 
WERE REASONABLY FORESEEABLE BY BOTH PARTIES BUT 
COULD  HAVE  BEEN  PREVENTED  BY  YOU  SUCH  AS,  FOR 
EXAMPLE  (BUT  WITHOUT  LIMITATION),  LOSSES  CAUSED 
BY VIRUSES, TROJANS OR OTHER MALICIOUS PROGRAMS, 
OR LOSS OF OR DAMAGE TO YOUR DATA .  THE FOREGOING 
LIMITATIONS  WILL  APPLY  WITH  RESPECT  TO  CISCO,  ITS 
DISTRIBUTORS, CONTRACTORS, AND AGENTS AND EVEN 
IF  ANY  WARRANTY  OR  REMEDY  PROVIDED  UNDER  THIS 
LIMITED  WARRANTY  FAILS  OF  ITS  ESSENTIAL  PURPOSE .  
NOTHING IN THIS SECTION SHALL LIMIT THE LIABILITY OF 
CISCO OR ITS DISTRIBUTORS, CONTRACTORS OR AGENTS 
IN RELATION TO DEATH OR PERSONAL INJURIES CAUSED 
BY THEIR NEGLIGENCE .

Indemnity.

    You  agree  that  Cisco  and  its  distributors, 

partners,  contractors  and  agents  shall  have  no  liability 
whatsoever  for  any  use  You  make  of  the  Technology . 
You  shall  indemnify  and  hold  harmless  Cisco  and  its 
distributors,  partners,  contractors  and  agents  from 
any  claims,  damages,  losses,  liabilities,  costs  and  fees 
(including reasonable attorney fees) arising from Your use 

of the Technology as well as from Your failure to comply 
with any term of this Agreement .

Technical  Support. 

  This  limited  warranty  is  neither 

a  service  nor  a  support  contract .    Information  about 
Cisco’s  current  technical  support  offerings  and  policies 
(including any fees for support services) can be found at 
www.myciscohome.com/support .  

Export. 

  Software,  including  technical  data,  may  be 

subject to U .S . export control laws and regulations and/or 
export or import regulations in other countries .  You agree 
to comply strictly with all such laws and regulations .

U.S. Government Users.

  The Software and Documentation 

qualify as “commercial items” as defined at 48 C .F .R . 2 .101 
and  48  C .F .R .  12 .212 .    All  Government  users  acquire  the 
Software  and  Documentation  with  only  those  rights 
herein that apply to non-governmental customers .  Use of 
either the Software or Documentation or both constitutes 
agreement  by  the  Government  that  the  Software  and 
Documentation  are  “commercial  computer  software” 
and  “commercial  computer  software  documentation,” 
and constitutes acceptance of the rights and restrictions 
herein .

General Terms.

  This Agreement will be governed by and 

construed  in  accordance  with  the  laws  of  the  State  of 
California, without reference to conflict of laws principles .  
The  United  Nations  Convention  on  Contracts  for  the 
International Sale of Goods will not apply . If any portion 
of this Agreement is found to be void or unenforceable, 
the  remaining  provisions  will  remain  in  full  force  and 
effect .  Each  party  recognizes  and  agrees  that  the 
warranty disclaimers and liability and remedy limitations 
in  this  Agreement  are  material  bargained  for  bases  of 
this  Agreement  and  that  they  are  reasonable  and  have 
been  taken  into  account  and  reflected  in  determining 
the  consideration  to  be  given  by  each  party  under  this 
Agreement  and  in  the  decision  by  each  party  to  enter 
into  this  Agreement .    Cisco’s  distributors,  contractors 
and  agents  are  intended  third  party  beneficiaries  under 
this  Agreement .    This  Agreement  constitutes  the  entire 
agreement  between  the  parties  with  respect  to  the 
Software  and  supersedes  any  conflicting  or  additional 
terms  contained  in  any  purchase  order  or  elsewhere .  
Except  as  set  forth  in  the  above  “License”  Section  or 
otherwise  expressly  provided  under  this  Agreement,  no 
amendment to or modification of this Agreement will be 
binding unless in writing and signed by Cisco and You .  

Linksys, Cisco and the Cisco Logo and other trademarks 
contained  in  the  Software  and  Documentation  are 
trademarks  or  registered  trademarks  of  Linksys,  Cisco, 
its  licensors  and  third  parties,  as  the  case  may  be .   You 
may  not  remove  or  alter  any  trademark,  trade  names, 
product  names,  logo,  copyright  or  other  proprietary 
notices,  legends,  symbols  or  labels  in  the  Software  and 
Documentation .    This  Agreement  does  not  authorize 

Содержание E2100L















































































Отзывы: