![background image](http://html.mh-extra.com/html/linksys/befsr41-etherfast-cable-dsl-router/befsr41-etherfast-cable-dsl-router_user-manual_1924542027.webp)
21
Chapter 5: Configuring the Router
The Setup Tab - MAC Address Clone
EtherFast Cable/DSL Router with 4-Port Switch
Gateway
. This is the IP address of the gateway device that allows for contact between the Router and the remote
network or host.
Hop Count
. This determines the maximum number of steps between network nodes that data packets will travel.
A node is any device on the network, such as PCs, print servers, routers, etc.
Interface
. Select
Local
or
Internet
, depending on the location of the static route’s final destination.
Delete Entry
. If you need to delete a route, select its number from the drop-down menu, and click the
Delete
Entry
button.
Show Routing Table
. Click the
Show Routing Table
button to open a screen displaying how data is routed
through your local network. For each route, the Destination LAN IP address, Subnet Mask, Default Gateway, Hop
Count, and Interface are displayed. Click the
Refresh
button to update the information.
When you have finished making changes to this screen, click the
Save Settings
button to save the changes, or
click the
Cancel Changes
button to undo your changes. Help information is shown on the right-hand side of the
screen. For additional help, click
More
.
Figure 5-14: Routing Table Entry List
Содержание BEFSR41 - EtherFast Cable/DSL Router
Страница 73: ...67 Appendix H Regulatory Information and Safety EtherFast Cable DSL Router with 4 Port Switch ...
Страница 74: ...68 Appendix H Regulatory Information and Safety EtherFast Cable DSL Router with 4 Port Switch ...
Страница 75: ...69 Appendix H Regulatory Information and Safety EtherFast Cable DSL Router with 4 Port Switch ...